Documentation Index

Fetch the complete documentation index at: https://knowledgecenter.docuware.com/llms.txt

Use this file to discover all available pages before exploring further.

Skip to main content

Change of IP addresses used for sending emails

DocuWare is moving the service that sends emails through your own SMTP server to a new infrastructure. As a result, the IP addresses DocuWare Cloud uses to send emails through your mail server change in all regions. No other DocuWare IP addresses change and receiving emails through Connect to Mail is not affected. The change applies to DocuWare Cloud only.

Your settings in DocuWare stay as they are. You use DocuWare Configurations > Mail Services > Sending only to see which mail services send through your own SMTP server, and to test them after the switch. Whether you have to act depends on your firewall, mail server, and sign-in settings: if they limit which IP addresses may connect to your mail server, the new addresses have to be added there.

Important: add the new IP addresses before the switch

DocuWare keeps sending your emails from the current IP addresses until February 1st, 2027, so nothing changes for your emails before then. If DocuWare's current mail sending IP addresses are allowlisted anywhere in your setup, add the new IP addresses before February 1st, 2027. From that date, emails sent through your SMTP connection will fail if the new IP addresses are not allowed. Receiving emails (Connect to Mail) is not affected.

Does the IP address switch affect my organization?

You need to act only if both of these statements are true:

  1. You use your own SMTP connection.
    A mail service in DocuWare Configurations > Mail Services > Sending uses your own SMTP server or email provider.  If DocuWare sends emails from the default DocuWare system address, you are not affected.

  2. DocuWare's current IP addresses are listed somewhere in your setup,
    for example, in:

    • a firewall rule that allows DocuWare to connect to your mail server

    • IP restrictions on your mail server or at your email provider, such as a Microsoft Exchange receive connector, a Google Workspace SMTP relay, or an IP access list at providers such as SendGrid

    • a sign-in or conditional access policy that only allows certain IP addresses or locations, for example, Microsoft Entra Conditional Access

If you are not sure about the second statement, follow steps 1 and 2 in the “Update your setup for the new IP addresses” section below. Or ask your IT or mail administrator to search your firewall, mail server, and security settings for the current IP addresses.

Timeline for the switch

Date

What happens

What you do

Mid-January

Final notice, that the switch happens in 7–10 days

Last chance to add the new IP addresses

February 1st, 2027

DocuWare switches to the new Mail Sending Service. All emails through your SMTP connection are sent from the new IP addresses only.

Test your connection - step 4

After February 10th, 2027

The switch is complete.

Remove the previous IP addresses - step 5

Current and new email sending IP addresses

Each region currently uses one IP address and gets four new IP addresses. The current IP address stays in use until February 1st, 2027. Add all four new IP addresses for your region: DocuWare can send from any of them, so an allowlist that contains only some of them causes emails to fail at random.

Use the IP addresses for the region where your DocuWare Cloud system is hosted. If you are not sure which region this is, ask your DocuWare partner or DocuWare Support.

Region

Current IP address (until February 1st, 2027)

New IP addresses (add all four)

EMEA

52.169.44.150

North Europe:

  • 172.205.3.215

  • 172.205.37.138

West Europe:

  • 132.164.41.73

  • 52.149.109.102

US

40.122.236.174

Central US:

  • 172.169.128.59

  • 172.169.60.31

East US:

  • 130.213.174.6

  • 135.224.215.219

Japan

20.37.117.192

Japan East:

  • 130.33.157.60

  • 135.149.43.96

Japan West:

  • 135.149.182.72

  • 74.226.69.62

Australia

52.237.239.102

Australia East:

  • 4.195.97.234

  • 4.254.61.32

Australia Southeast:

  • 20.70.93.187

  • 20.70.99.164

Add the new IP addresses alongside the current ones. Until February 1st, 2027, emails are sent from the current IP addresses; thereafter, only from the new ones.

Update your setup for the new IP addresses

Step 1: Check your SMTP connection in DocuWare

  1. Open DocuWare Configurations > Mail Services > Sending.

  2. Note every mail service that uses your own SMTP server, with its server name, port, and email provider.

  3. If no such mail service exists, you are not affected. You can stop here.

Step 2: Find where the current IP addresses are used

Search for the current IP address of your region in the table listed under “Current and new email sending IP addresses” in every place that controls access to your mail server. Typical places:

Where

Typical owner

What to look for

Firewall in front of your mail server

Network / IT team

Inbound rules on the SMTP port, usually 25, 465 or 587

Microsoft Exchange (on-premises)

Mail administrator

Receive connector limited to remote IP addresses

Microsoft Exchange Online

Microsoft 365 administrator

Inbound connector or SMTP relay connector restricted by IP address

Google Workspace

Google Workspace administrator

SMTP relay service with allowed IP addresses

Email provider (for example, SendGrid)

Provider account owner

IP access list or IP allowlist

Microsoft Entra ID

Identity/security team

Conditional Access policy or named location that limits sign-ins by IP address

If you find none of the current IP addresses, you are not affected.

Step 3: Add the new IP addresses

In every place you found in Step 2:

  1. Add all four IP addresses for your region, with the same settings as the existing entry: ports, protocol, and scope.

  2. Keep the current IP addresses. They stay in use until February 1st, 2027.

  3. Save and apply the change. Some systems, such as firewalls or connectors, may need a few minutes to take effect.

Complete this step before February 1st, 2027. You can do it right away: adding the new IP addresses has no effect on how emails are sent today.

Important: compare your entries with the list of new IP addresses

Do not use a test email to check this step. Until February 1st, 2027, a test email still leaves DocuWare from the current IP addresses, so it arrives even when the new IP addresses are blocked. Until the switch, the only reliable check is to compare every entry you made with the list of new IP addresses. The test email in step 4 becomes meaningful on the switch date.

Step 4: Test after the switch

  1. On or after February 1st, 2027, open DocuWare Configurations > Mail Services > Sending.

  2. Open your SMTP settings and click Send test email.

  3. Check that the test email arrives.

Step 5: Remove the old IP addresses

After February 1st, 2027, once the test in step 4 succeeds, remove the current IP addresses from all places you updated in step 3.

Troubleshooting: emails from DocuWare no longer arrive

If workflow emails, notifications, or password reset emails stopped arriving on or after February 1st, 2027, the new IP addresses are most likely not allowed in your setup. From that date, all emails sent through your SMTP connection will come from the new IP addresses only.

  1. Check whether the DocuWare administrator of your organization received an email from DocuWare about a mail service that stopped working.

  2. Follow steps 2 and 3 above to add the new IP addresses. Make sure all four new IP addresses for your region are allowed.

  3. Run the test from step 4.

  4. Emails that could not be delivered are not lost right away. DocuWare tries to send each failed email again for up to 7 days. As soon as the new IP addresses are allowed, these emails are delivered automatically. Emails that still cannot be delivered after 7 days are not sent.

If the test still fails, check the error message in the SMTP settings and contact DocuWare Support.

Frequently asked questions about the switch

Will my emails stop working before the switch?

No. DocuWare keeps sending your emails from the current IP addresses until February 1st, 2027.

Can I replace the current IP addresses with the new ones right away?

No. The current IP addresses stay in use until February 1st, 2027. Add the new ones alongside them, and remove the current ones after the switch.

What happens to emails that fail after the switch?

DocuWare tries to send them again for up to 7 days. If you add the new IP addresses within that time, the emails are delivered automatically. After 7 days, emails that could not be delivered are not sent.

I use the default DocuWare system address. Do I need to do anything?

No. Only emails sent through your own SMTP connection are affected.

Do other DocuWare IP addresses change, for example, for Connect to Mail?

No. Only the IP addresses used for sending emails through your own SMTP server change.

Does this affect DocuWare on-premises systems?

No. DocuWare on-premises systems send emails directly from your own servers.